Connecting your smoke it controller to the Pit Boss App

How to Connect Your Platinum Series Grill to the APP

Before starting, make sure the Bluetooth feature on your iPhone is turned on.

1. 1. Open Your Pit Boss APP

2. 

3. 2. Select the Grill Icon in the Lower Middle Menu

   

4. 3. Enter a Zone Name and Select “Save Zone” at the Bottom of the Screen

   • Be sure the address on the map is correct.

     

5. 4. Select the Zone You Just Named

   

6. 5. Select the Grill Model

   • If you do not see your grill on the screen, make sure it is plugged in.
     

7. 6. Name Your Grill and Select Connect

   • The Connect button will be on the bottom right.
     

8. 7. Select the Grill Icon

   • If your grill is plugged in, the Grill Icon will be Bright When Discovered by the App. Select the Grill Icon.
     

9. 8. Your App Will Shine Bright When On and Connected

   
   
   
   • Note the following:
     • - Functions are across the top.
     • - Smoker and grill readout will appear the same as on control.
     • - The center dial can be rotated clockwise to increase temp and counterclockwise to decrease temp.
     • - Probe readouts are below temp dial.
     • - Key component icons are below probe readouts.
     • - If “IT” icon on grill continually blinks, select the gear in the upper right corner and go to step 10 to initiate a firmware update.